TBAI‐Catalyzed/Water‐Assisted Double C−S Bond Formations: An Efficient Approach to Sulfides through Metal‐Free Three‐Component Reactions

An aqueous catalytic method for double C?S bond formations that involves alcohol derivatives, organic halides, and sodium thiosulfate has been developed. A diverse range of functionalized sulfides, including pharmaceutical and biological derivatives, can be obtained in an efficient and eco‐friendly manner under air. The mechanistic studies revealed that this tetrabutylammonium‐iodide‐catalyzed/water‐assisted reaction generated a mercaptan species as the key intermediate.     

An improved algorithm for the shallow water equations model reduction: Dynamic Mode Decomposition vs POD

We propose an improved framework for dynamic mode decomposition (DMD) of 2‐D flows for problems originating from meteorology when a large time step acts like a filter in obtaining the significant Koopman modes, therefore, the classic DMD method is not effective. This study is motivated by the need to further clarify the connection between Koopman modes and proper orthogonal decomposition (POD) dynamic modes. We apply DMD and POD to derive reduced order models (ROM) of the shallow water equations. Key innovations for the DMD‐based ROM introduced in this paper are the use of the Moore–Penrose pseudoinverse in the DMD computation that produced an accurate result and a novel selection method for the DMD modes and associated amplitudes and Ritz values. A quantitative comparison of the spatial modes computed from the two decompositions is performed, and a rigorous error analysis for the ROM models obtained is presented. Copyright © 2015 John Wiley & Sons, Ltd.     

Topological “interfacial” polymer chemistry: Dependency of polymer “shape” on surface morphology and stability of layer structures when heating organized molecular films of cyclic and linear block copolymers of n‐butyl acrylate‐ethylene oxide

The “topological polymer chemistry” of amphiphilic linear and cyclic block copolymers at an air/water interface was investigated. A cyclic copolymer and two linear copolymers (AB‐type diblock and ABA‐type triblock copolymers) synthesized from the same monomers were used in this study. Relatively stable monolayers of these three copolymers were observed to form at an air/water interface. Similar condensed‐phase temperature‐dependent behaviors were observed in surface pressure–area isotherms for these three monolayers. Molecular orientations at the air/water interface for the two linear block copolymers were similar to that of the cyclic block copolymer. Atomic force microscopic observations of transferred films for the three polymer types revealed the formation of monolayers with very similar morphologies at the mesoscopic scale at room temperature and constant compression speed. ABA‐type triblock linear copolymers adopted a fiber‐like surface morphology via two‐dimensional crystallization at low compression speeds. In contrast, the cyclic block copolymer formed a shapeless domain. Temperature‐controlled out‐of‐plane X‐ray diffraction (XRD) analysis of Langmuir–Blodgett (LB) films fabricated from both amphiphilic linear and cyclic block copolymers was performed to estimate the layer regularity at higher temperatures. Excellent heat‐resistant properties of organized molecular films created from the cyclic copolymer were confirmed. Both copolymer types showed clear diffraction peaks at room temperature, indicating the formation of highly ordered layer structures. However, the layer structures of the linear copolymers gradually disordered when heated. Conversely, the regularity of cyclic copolymer LB multilayers did not change with heating up to 50 °C. Higher‐order reflections (d₀₀₂, d₀₀₃) in the XRD patterns were also unchanged, indicative of a highly ordered structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 486–498     

Spatiotemporal patterns of stable isotopes and hydrochemistry in springs and river flow of the upper Karkheh River Basin,Iran

Karst springs of the Zagros Mountains contribute a significant amount to agricultural and human water demands of western and south-western Iran. For an adequate management of available water resources in semi-arid and arid regions, sufficient hydrological monitoring is needed, and hydro-chemical and isotope hydrological data provide important additional information. About 350 water samples were collected from precipitation, river water, and karst springs of the upper part of the Karkheh River Basin (20,895 km²) located between 33°35^′ and 34°55^′ North and 46°22^′ and 49°10^′ East with elevations ranging from 928 to 3563 m above sea level. Sampling was conducted in monthly time resolution from August 2011 to July 2012. All samples were analysed for hydro-chemical parameters (pH, electrical conductivity, and major ions) and stable isotopes (deuterium, oxygen-18). Isotope values of precipitation indicate a local meteoric water line (Zagros MWL δ²H=6.8 δ¹⁸O+10.1; R²=0.99) situated between the Mediterranean MWL and Global MWL. Spring and river water isotope values vary between?7.1 and?4.1 ‰, and?38 and?25 ‰ for δ¹⁸O and δ²H, respectively, responding to winter snowmelt and evaporation. This work implements stable isotopes and hydro-chemical information of springs and river water to understand hydrological and hydro-geological interrelations in karstic semi-arid areas and helps to improve the current water resources management practices of western Iran.     

Synthesis of water‐soluble allyl‐functionalized oligochitosan and its modification by thiol–ene addition in water

A novel, straightforward and versatile chemical pathway has been studied to functionalize water‐soluble chitosan oligomers. This metal‐free methodology is based on the epoxy‐amine reaction of the allyl glycidyl ether with chitosan, followed by thiol‐ene radical coupling reaction of ω‐functional mercaptans, using 4,4′‐Azobis(4‐cyanovaleric acid) as a free radical initiator. Both reactions were entirely carried out in water. In a preliminary step, chitosan depolymerization was carried out using H₂O₂ in an acetic medium under 100 W microwave irradiation, optimizing the yield of water‐soluble oligomers. Functionalization by six different thiols bearing alcohol, carboxylic acid, ester, and amino groups was then performed, leading to a range of functional oligochitosans with different grafting efficiencies. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 39–48     

Interim Anatase Coating Layer Stabilizes Rutile@CrxOy Photoanode for Visible‐Light‐Driven Water Oxidation

Ternary core–shell heterostructured rutile@anatase@Cr_xO_y nanorod arrays were elaborately designed as photoanodes for efficient photoelectrochemical water splitting under visible‐light illumination. The four‐fold enhanced and stabilized visible‐light photocurrent highlights the unique role of the interim anatase layer in accelerating the interfacial charge transfer from the Cr_xO_y chromophore to rutile nanorods.     

Green Approach to the Fabrication of Superhydrophobic Mesh Surface for Oil/Water Separation

We report a simple and environment friendly method to fabricate superhydrophobic metallic mesh surfaces for oil/water separation. The obtained mesh surface exhibits superhydrophobicity and superoleophilicity after it was dried in an oven at 200 °C for 10 min. A rough silver layer is formed on the mesh surface after immersion, and the spontaneous adsorption of airborne carbon contaminants on the silver surface lower the surface free energy of the mesh. No low‐surface‐energy reagents and/or volatile organic solvents are used. In addition, we demonstrate that by using the mesh box, oils can be separated and collected from the surface of water repeatedly, and that high separation efficiencies of larger than 92 % are retained for various oils. Moreover, the superhydrophobic mesh also possesses excellent corrosion resistance and thermal stability. Hence, these superhydrophobic meshes might be good candidates for the practical separation of oil from the surface of water.     

An Electron Dynamics Mechanism of Charge Separation in the Initial‐Stage Dynamics of Photoinduced Water Splitting in XMnWater (X=OH,OCaH) and Electron–Proton Acceptors

An electron dynamics mechanism of charge separation in the initial stage of excited‐state reactions of the class of X?Mn?OH₂???A${ \to }$ X?Mn?OH???HA (X=OH or OCaH; A=N‐methylformamidine, guanidine, imidazole, or ammonia cluster) is reported. The dynamic effect of calcium doping is also revealed. This study provides a novel factor to be considered in designing efficient systems for photoinduced water splitting.